Quick Setup; Method One: Via The Wps Button; Method Two: Via A Web Browser - TP-Link TL-WA830RE User Manual

Chapter 2
2. 1.
Power on
Plug the extender into an electrical outlet
LED changes to solid on.
Connect to the host network
There are two ways to connect to the host network: via the WPS button or via a web
browser. Using the WPS button is the easiest way to extend your host network. We
recommend you to use this way if your router has a WPS button. The button might look
like one of these:
2. 1. 1.
1. Press the WPS button on your host router, and then press the WPS button on the
extender within 2 minutes.
Tips:
•
•
2. Wait until the WPS LED changes from blinking to a solid status, which indicates that
the WPS connection is successful. If it doesn't, please refer to
Browser.
3. Enjoy!
network shares the same SSID (network name) and password as those of your host
network.
Tips:
Since the performance of the extended networks will be affected by the distance between extender and host
router, we recommend that you relocate your extender by referring to
Downloaded from ManualsNet.com

Quick Setup

| |
WPS

Method One: Via the WPS button

Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to
Two: Via a Web Browser.
For more information about using WPS button on your host router, please refer to the router manufacturer's
user guide.
Connect to the extended network and enjoy the Internet. The extended
search engine
near your host
.
Set Up Internet Connection
router, and then wait until the
RANGE EXTENDER
ON/OFF POWER ETHERNET RANGE EXTENDER RESET
Method Two: Via a Web
Position Your Extender.
Method
6