TP-Link RE200 User Manual page 21

Chapter 3
3. Enable Access Control.
¾ To block specific device(s):
Note: Devices connected to the extender via an Ethernet cable cannot be blocked.
1. Select Blacklist and click Save.
2. Select the device to be blocked in the
corresponding checkbox.
3. Click Block and the selected device(s) will be added to the
4. Click in the Devices in Blacklist
as needed.
Online Devices
table to set the Effective Time
Customize Your Network
table by ticking the
Devices in Blacklist table.
for a certain entry
19