Ricoh FT4460 Service Manual page 229

9. Manually set the first and second scanners in their home position.
10. Set the four jig pins [A] to fix the first and second scanners.
11. Remove the sorter interface PCB bracket (not shown) and position to the
side.
12. Loosen the fixing screw of the wire tension bracket [F] and loosen the
wire tension adjusting screw. [M]
13. Position the silver scanner wires [2] and [4] at points [B] and [D] as
shown in the illustration.
NOTE: Temporarily remove the front fixing plate (1 screw), attach the silver
wire [4] to the wire fixing plate [G], and set the spring [H]. Reinstall
the fixing plate screw.
5-13
28 February 1989