Ricoh FT4460 Service Manual page 195

Output
No. Electrical Component
Duplex/Overlay Feed MC (Multi Duplex/Overlay)
25
1st Pick-up Solenoid (Copier)
26
27 1st Lift Motor (Copier)
28 Duplex/Overlay Transport Solenoid (Copier)
29 Junction Gate Solenoid (Multi Duplex/Overlay)
Inverter Solenoid (Copier)
30
31 Positioning Roller Solenoid (Copier)
32 Duplex/Overlay Transport MC (Copier)
Move the jogger side fences to the home position (Copier)
33
Move the jogger side fences to the home position
34
(Multi Duplex/Overlay)
Positioning Roller Solenoid (Multi Duplex/Overlay)
35
36 Cam Clutch Solenoid (Multi Duplex/Overlay)
Eraser Lamps
37
Main Corona + Standard Grid + Transfer + Separation Charge
38
Main Corona + ID Sensor Grid + Transfer + Separation Charge
39
NOTE: 1: Main motor, development drive motor, and toner supply clutch
(for color toner) turn on and the development unit change
solenoid is set.
2: Main motor, development drive motor, and toner supply clutch
(for black toner) turn on and the development unit change
solenoid is reset.
4-35
28 February 1989