Ricoh FT4460 Service Manual page 190

28 February 1989
Mode No. Function
5. Paper is not fed
from the Multi
Duplex/Overlay
unit and the
inverter relay
sensor in the
copier is not
activated when
making multi
duplex copies.
6. The inverter
sensor is not
activated in the
Multi Overlay
mode.
7. Paper is not fed
to the fusing unit.
8. Paper jams in the
fusing unit.
9. Paper is not fed
to the Sorter unit.
10. Paper jams in
the Sorter unit.
11. Paper does not
reach the paper
exit sensor in the
Multi Duplex/
Overlay unit.
12. Paper stays on
the paper exit
sensor in the
Multi Duplex/
Overlay unit.
13. Paper does not
reach the inver-
ter sensor in the
Single Duplex
mode.
14. Paper stays on
the inverter sen-
sor in the Single
Duplex mode.
Data Factory
Setting
0
0
0
0
0
0
0
0
0
4-30
Comments
0