© Copyright Lenovo 2016
Table 388. VMware Operations (continued)
Command Syntax and Usage
virt vmware updpg <Port Group name> <host ID> <VLAN ID (0‐4094)>
[<shaping enabled> <average (1‐1000000000)> <burst (1‐1000000000)>
<peak (1‐1000000000)>]
Updates a VMware host's Port Group parameters. Use one of the following
identifiers for the host ID:
UUID
IP address
Host name
Enter the traffic shaping parameters as follows:
Shaping enabled
Average traffic, in kilobits per second
Maximum burst size, in kilobytes
Peak traffic, in kilobits per second
Delete traffic shaping parameters.
Command Mode: All
virt vmware vmacpg <VM NIC MAC address> <Port Group name>
Changes a VM NIC's configured Port Group.
Command Mode: All
[no] virt vmware vsw <host ID> <Virtual Switch name>
Adds or removes a Virtual Switch to a VMware host. Use one of the following
identifiers to specify the host:
UUID
IP address
Host name
Command Mode: All
Chapter 5: Operations Commands
681