Lenovo RackSwitch G8332 Command Reference Manual page 560

560
G8332 Command Reference for ENOS 8.4
Table 297.
BGP Peer Configuration Options (continued)
Command Syntax and Usage
neighbor <1‐96> redistribute
Configures BGP neighbor redistribution. To view command options, see
page 563.
Command mode: Router BGP
neighbor <1‐96> remote­address <IP address>
Defines the IP address for the specified peer (border router), using dotted
decimal notation.
The default address is 0.0.0.0.
Command mode: Router BGP
neighbor <1‐96> remote­as <1‐65535>
Sets the remote autonomous system number for the specified peer.
Command mode: Router BGP
neighbor <1‐96> retry­interval <1‐65535>
Sets connection retry interval, in seconds.
The default value is 120 seconds.
Command mode: Router BGP
neighbor <1‐96> route­map {in|out} <1‐255>
Adds route map into in‐route or out‐route map list.
Command mode: Router BGP
no neighbor <1‐96> route­map {in|out} {<1‐255>|all}
Removes all route maps or a specific route map from in‐route or out‐route
map list.
Command mode: Router BGP
neighbor <1‐96> route­origination­interval <1‐65535>
Sets the minimum time between route originations, in seconds.
The default value is 15 seconds.
Command mode: Router BGP
[no] neighbor <1‐96> route­reflector­client
Enables or disables the peer as a route reflector client. Configuring route
reflector clients, implicitly sets up the local router as a route reflector.
Command mode: Router BGP
[no] neighbor <1‐96> send­community
Enables or disables sending a community attribute to a BGP neighbor.
Command mode: Router BGP