© Copyright Lenovo 2016
Table 244.
LACP Port Options
Command Syntax and Usage
lacp priority <1‐65535>
Sets the priority value for the selected port. Lower numbers provide higher
priority.
The default value is 32768.
Command mode: Interface port/Interface portchannel
default lacp priority
Resets the priority value for the port to its default value of 32768.
Command mode: Interface port/Interface portchannel
lacp suspendindividual
Sets the port in LACP suspended state if it does not receive LACPDUs
anymore.
Note: The default value is suspended for all switch ports.
Command mode: Interface port/Interface portchannel
no lacp suspendindividual
Sets the port in LACP individual state if it does not receive LACPDUs
anymore.
Command mode: Interface port/Interface portchannel
default lacp suspendindividual
Resets the LACP state of the port to its default value.
Command mode: Interface port/Interface portchannel
default lacp
Resets the LACP port configuration to its default values.
Command mode: Interface port/Interface portchannel
portchannel minlinks <1‐32>
Set the minimum number of links for the LACP LAG to which this port
belongs. If the specified minimum number of ports are not available, the LAG
is placed in the down state.
Command mode: Interface port/Interface portchannel
default portchannel minlinks
Restores the minimum number of links for this port to its default value.
Command mode: Interface port/Interface portchannel
show interface port <port alias or number> lacp
Displays the current LACP configuration for this port.
Command mode: All
Chapter 4: Configuration Commands
485