Zte ZXV10 W300 Quick Installation Manual page 22

ZXV10 W300 Quick Installation Manual
PPPoE parameter description
1. Globally unique parameters of the WAN connection
Name: Specifies the name of the connection to be created
Type: Specifies the type of the connection to be created
Options: Enables firewall and NAT
2. PPP parameter description
Username: Specifies your username for the PPPoE access
Password: Specifies your password for the PPPoE access
Idle time: Specifies the idle time allowed when no flow
occurs on the PPPoE connection. The connection will be
disconnected if the idle time is exceeded. The option cannot
be configured unless the Dial as needed option is enabled.
Dial as needed: Indicates the connection should be
disconnected if no flow occurs on the connection during the
idle time.
Authentication: Provides three authentication options: Auto,
CHAP and PAP.
22
1
3
4
2