Zte ZXV10 W300 Quick Installation Manual page 10

ZXV10 W300 Quick Installation Manual
There are nine ports and buttons on the side of the ZXV10 W300 device.
Ports and buttons are described in the table below.
Port
No.
identification
1
DSL
2
WAN
3
LAN1~ LAN4
4
Wi-Fi
5
Reset
6
On/Off
7
Power
8
Antenna
10
Description
Connected to the ADSL line or splitter via RJ-11
telephone wire
Connected to the ADSL line via RJ-11, or
connected WAN via RJ-45
1 and 2 is alternative. When use 1 as ADSL router,
the connector 2 will not be provided. And when use
2 as ADSL/LAN router, 1 will not be provided.
Connected to the PC NIC via RJ-45 cable
WLAN radio frequency ON/OFF switch
The device is power on. Holding on the button for
more than 10 seconds will reset the current settings
to the factory default settings, and the system will
then restart automatically.
Power switch
Connected to the associated power adaptor
Antenna