Getting to Know Your OBD2 Device Appearance The following figure is for your reference only. Z6200 Quick Start Guide 1. Reset hole 2. micro-SIM card slot 3. Restart key 4. LED 1 5. LED 2 ZTE CORPORATION 6. OBD interface NO.
Getting to Know Your OBD2 Device Installing the micro-SIM card 1. Use the tray eject tool to take out the card tray. Indicator lights 2. Put the micro-SIM card into the card tray and slip it into the card slot. Indicator Status Description...
Page 3
Connecting to Your OBD2 Device Turning on Your OBD2 Device Start your vehicle’s engine and let it run for at least 30 seconds. Using Your Wi-Fi Devices 1. Find your OBD2 device's network name in your Wi-Fi device's list of available wireless networks. 2.
Page 4
NOTE: Refer to the chapter Getting to Know the Wi-Fi Changing Wi-Fi SSID SSID and Password to get the default Wi-Fi SSID and Password password. 1. From the connected device, log in to the 4G Mobile Hotspot Getting to Know the Wi-Fi SSID and configuration page.
1. From the connected device, log in to the 4G Mobile Hotspot WAN Connection Mode > Manual, and configuration page. then click Apply. 2. Select Settings > Wi-Fi Settings. 4. Select Home and click 3. Set Allowed Devices Switch to On, and click Apply. connect to the Internet.
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.