Page 3
ZTE CORPORATION. ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China Website: http://support.zte.com.cn Post code: 518057...
Page 5
0086-755-26770160; or mail to “ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China”. Our postcode is 518057.
Page 6
Readability Overall Instructiveness Your suggestion on Index Correctness improvement Completeness this Structure documentation Illustration Readability Your other suggestions on product documentation...
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 1 Overview Thank you for using ZTE’s ZXV10 W300 Wireless ADSL Router. Please read this manual carefully before using the product. ZXV10 W300 is an enhanced wireless ADSL use-end access device providing...
Page 10
ZXV10 W300 Wireless ADSL Router User's Manual supporting automatic identification of crossover cable and straight-through cable. Provide one IEEE 802.11g/b wireless interface Provide one USB Slave interface (optional) Provide wireless data security using WEP-64, WEP-128, WEP-256, WPA-PSK and MAC address...
Corresponding ISP services are required for the above functions. 1.2 Packing The device list in the package contains: ZXV10 W300 Wireless ADSL Router External splitter Power supply adapter Telephone lines Straight-through cable Warranty card Certificate of Quality ZXV10 W300 Wireless ADSL Router User’s Manual...
ZXV10 W300 Wireless ADSL Router User's Manual 1.3 System Requirement Before using ZXV10 W300, please ensure the following system requirement: ADSL service has been subscribed. Your ADSL Service Provider must provide you with at least 1 legal IP address (allocated dynamically via dial-up or...
ZXV10 W300 Wireless ADSL Router User's Manual 2.2 Indicators and Ports See TABLE 1 for the front panel indicator description. TABLE 1 FRONT PANEL INDICATOR DESCRIPTION Indicator Color Functions Steady ON: Indicates power-on. OFF: Indicates power-off or failure Steady ON: The device is connected to the Internet via Green successful built-in dial-up.
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Indicator Color Functions Steady ON: Indicates LAN3 connection established. Flashing: Indicates data sending/receiving on the Green LAN3 port. OFF: Indicates no connection is established on the LAN3 port. Steady ON: Indicates LAN4 connection established. Flashing: Indicates data sending/receiving on the Green LAN4 port.
Page 16
ZXV10 W300 Wireless ADSL Router User's Manual This page is intentionally blank.
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3 Fast Installation This chapter tells you how to connect the ZXV10 W300 to a PC, Intranet or the Internet. It is assumed that you have signed up for the ADSL service from the Service Provider.
Page 18
Note: You can only use the power adapter provided with the ZXV10 W300 device. Using other power adapter may damage the device or cause device operation failures.
Page 19
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. FIGURE 2 Installation sample 1: When the splitter is installed on the telephone line port RJ-11 RJ-45 Power Adapter MODEM LINE Splitter Line with PHONE ADSL Service Power Outlet PHONE PHONE FIGURE 3 Installation sample 2: When the Splitter is Installed near the Modem RJ-11 RJ-45...
ZXV10 W300 Wireless ADSL Router User's Manual 3.2 ZXV10 W300 Factory Defaults Factory defaults are as follows: Device IP address: 192.168.1.1; Subnet mask: 255.255.255.0 Use DHCP server by default. The IP address can be obtained from the device via DHCP.
Page 21
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Panel. Double-click the Network Connection icon. From the right-button menu, select Local Area Connection > Properties. Select Internet Protocol (TCP/IP) > Properties. From the Internet Protocol (TCP/IP) Properties dialog box: Ensure that Obtain IP address Automatically is checked. Ensure that Obtain DNS server address automatically is checked.
Page 22
All functions of the ZXV10 W300 can be set up. General user level, with "public" as both username and initial password. General users can only monitor the operating status of the device. Note: Be sure to remember the password of the ZXV10 W300.
4.1 Logging on to the ZXV10 W300 Device Visit http://192.168.1.1 via a browser and log on to the ZXV10 W300. Select Wizard to complete the basic configurations, as shown in FIGURE 4. FIGURE 4 Logging on to the ZXV10 W300 Device...
ZXV10 W300 Wireless ADSL Router User's Manual 4.2 Configuring VPIs and VCIs This page displays the default values. Please set up using the data provided by your local Service Provider. After the setup, click the Next button in the window, as shown in FIGURE 5.
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3 Selecting Connection Types Seven types of connections are supported, including PPPoA, PPPoE, Static Bridged, Static Routed, DHCP, Bridge and CLIP, as shown in FIGURE 6. Select the type of connection to be established in this window.
ZXV10 W300 Wireless ADSL Router User's Manual FIGURE 6 Connection Type After selecting an option, click Next to set the next options. To modify the previous options, click Back to return to the previous step. 4.4 Setting Configurations Go to the configuration page depending on the connection type selected.
Page 27
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. FIGURE 7.
Page 28
ZXV10 W300 Wireless ADSL Router User's Manual FIGURE 7 PPP Username and Password The Username and Password should be configured according to the data provided by your local Service Provider. LAN settings, as shown in FIGURE 8. FIGURE 8 LAN Settings...
Page 29
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. This page configures the ZXV10 W300 IP address and subnet mask on the LAN side. Do not modify the configurations in this page if there are no special requirements. WAN settings, as shown in FIGURE 9.
Page 31
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. FIGURE 10 Wireless Setup Wireless LAN WEP security setup: Configure data for WEP encryption, as shown in FIGURE 11. FIGURE 11 Wireless Security...
ZXV10 W300 Wireless ADSL Router User's Manual 4.5 Displaying Configuration Data Pages displayed are different depending on the connections you configured. FIGURE 12 Summary FIGURE 12 shows the window that will appear when the PPPoE configuration is completed. Click Submit to enable the configuration.
FIGURE 13 Configuration Successful Window 4.6 Other Common Configurations 4.6.1 UPnP When the ZXV10 W300 device operates in Routing mode, if the terminal user use special applications like BitComet or BitSpirit, the UpnP function should be enabled to optimize the device performance.
ZXV10 W300 Wireless ADSL Router User's Manual Log on to the device using the username “admin”. Click the Advanced button on the web page to enter the Advanced -> UpnP page, as shown in FIGURE 14. FIGURE 14 Advanced->UPnP Click UpnP on the left side of the page to enter the UPnP configuration page.
Page 35
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Log on to the device using the username “admin”. Click the Advanced button on the web page to enter the Advanced -> UpnP page, Click Port Forwarding on the left side of the page to enter the Port Forwarding page, as shown in FIGURE 15.
ZXV10 W300 Wireless ADSL Router User's Manual 5 Technical Specifications 5.1 Hardware Specifications ADSL interface Compatible standards: ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, and ITU G.992.5 Line impedance: 100 Ω Connection line: A pair of ordinary telephone lines...
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Power supply Power adapter: 220 VAC input, 50Hz, 18VAC 500mA output Power: < 9 W Safety CCC, CE 5.2 Software Specifications VPI: 0-255; VCI: 32-65535 Support 8 PVC connections and auto-negotiation ATM Cell over ADSL, AAL5 Support UBR, CBR and VBR Support OAM F4/F5 IPoA...
Page 40
ZXV10 W300 Wireless ADSL Router User's Manual Support 2048 MAC learning addresses Support bridge filter Routing Static routing Dynamic routing NAT, ALGs Firewall DNS Proxy, IGMP Proxy UPnP DMZ Network management SNMP WLAN IEEE 802.11g/b WEP, WPA-PSK and MAC address filtering...
Page 41
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. This page is intentionally blank. 5-33...
The symptom indicates the failed connection between the When the telephone device and the office-end ADSL. Please make sure the line is connected, the ZXV10 W300 device has been installed properly according indicator to the samples. (See the installation samples) alternates between The first sample is recommended.
Page 43
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Problem Troubleshooting Use the Ping command to check if the network interface IP address (preset to 192.168.1.1) of the device can be pinged from the computer. If not, check the Ethernet cable connection.