Advertisement
Main Menu
Replacing a High-mount Brake
Light Bulb
1.
Remove the light assembly cover
by prying carefully with a cloth-
covered screwdriver in the
notches along the top edge. Then
pivot the cover out and down.
Remove the socket from the light
2.
assembly by turning it one-quarter
turn counterclockwise.
Table of Contents
3.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4.
Test the lights to make sure the
new bulb is working.
5.
Put the socket back into the light
assembly and turn it clockwise to
lock it in place.
6.
Place the cover back into the light
assembly. Push it up until it locks
in place.
Lights
217
Maintenance
Advertisement
