Advertisement
Main Menu
Automatic Transmission Fluid
DIPSTICK
Check the fluid level with the engine
at normal operating temperature.
1.
Park the vehicle on level ground.
Shut off the engine.
2.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
3.
Insert the dipstick all the way into
the transmission.
210
Maintenance
Table of Contents
DIPSTICK
4.
Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.
5.
If the level is below the lower
mark, add fluid into the tube to
bring it to the upper mark.
Always use Honda ATF-Z1
(Automatic Transmission Fluid). If
it's not available, you may use a
DEXRON III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality.
Have the transmission flushed and
refilled with Honda ATF-Z1 as
soon as it is convenient.
To thoroughly flush the
transmission, the technician
should drain and refill it with
UPPER MARK
Honda ATF-Z1 (Automatic
LOWER MARK
Transmission Fluid), then drive
the vehicle for a short distance.
Do this three times. Then drain
and refill the transmission a final
time.
6.
Insert the dipstick all the way back
in the transmission.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.
If you are not sure how to add fluid,
contact your Acura dealer.
Advertisement
