Advertisement
Main Menu
To select the CD changer, press the
CD button. The disc and track
numbers will be displayed. To select
a different disc, use the appropriate
preset buttons (1 6). On the model
−
with Rear Entertainment System,
use the preset 5 (DISC
−
select previous disc, or the preset 6
(DISC
) button to select the next
＋
disc in sequence.
If you select an empty slot in the
magazine, the changer will, after
finding that slot empty, try to load
the CD in the next slot. This
continues until it finds a CD to load
and play.
Table of Contents
Opening the In-Dash CD Changer
If Equipped
This audio system has an in-dash
CD changer that holds up to six
discs.
To load CDs or operate CD changer,
) button to
the ignition switch must be in the
ACCESSORY (I) or ON (II) position.
You cannot load and play 3-inch
(8-cm) discs in this system.
Loading CDs in the Changer
1.
Press and hold the Load button
until you hear a beep and see
''- - - -'' in the display, then release
the button.
To load only one CD, press and
release the Load button.
2.
On the left side of the display, the
CD Loaded indicator for an empty
position will begin blinking.
CD Changer
3.
When you see LOAd in the display,
insert the disc into the CD slot.
Insert it only about halfway, the
drive will pull it in the rest of the
way. You will again see the dashes
in the display as the CD is loaded.
4.
When LOAd appears again in the
display, insert the next disc into
the CD slot. Do not try to insert a
disc until LOAd appears. You
could damage the audio unit.
5.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, press the Load button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
Comfort and Convenience Features
CONTINUED
117
Advertisement
