Advertisement
Main Menu
Recalling a Memorized Driving
Position
On Touring Model
With Memory 1
With Memory 2
Each remote transmitter will also
activate the Driving Position
Memory System (see page
When you unlock the driver's door
with the remote transmitter and
open the door, you will hear a beep.
The driver's seat and outside
mirrors move to the positions stored
in that memory location. You will
hear two beeps when the movement
is complete.
Table of Contents
If the seat and mirrors are already in
the proper positions, you will hear
three beeps when you open the door.
The driving position memory
activated (Memory 1, Memory 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
94
).
Remote Transmitter
You can turn the driving position
memory activation off and on. To
turn it off, press and hold the LOCK
and UNLOCK buttons at the same
time for about one second. The LED
in the remote transmitter will blink
twice. Then release the buttons.
To turn it back on, repeat this
procedure. The LED will come on
for one second to indicate the
feature has been turned on.
Instruments and Controls
83
Advertisement
