Advertisement
Main Menu
Your vehicle's audio system will
disable itself if it is disconnected
from electrical power for any reason.
To make it work again, you must
enter a specific five-digit code with
the Preset buttons. Because there
are hundreds of number
combinations possible from the five
digits, making the system work
without knowing the exact code is
nearly impossible.
You should have received a card that
lists your audio system code number
and serial number. It is best to store
this card in a safe place at home. In
addition, you should write the audio
system's serial number in this
Owner's Manual.
If you should happen to lose the card,
you must obtain the code number
from an Acura dealer. To do this,
you will need the system's serial
number.
Table of Contents
If your vehicle's battery is
disconnected or goes dead, the audio
system will disable itself. If this
happens, you will see ''Code'' in the
frequency display the next time you
turn on the system. Use the Preset
buttons to enter the five-digit code.
The code is located on the radio code
card included in your Owner's
Manual kit. When it is entered
correctly, the radio will start playing.
If you make a mistake entering the
code, do not start over; complete the
five-digit sequence, then enter the
correct code. You have ten tries to
enter the correct code. If you are
unsuccessful in ten attempts, you
must then leave the system on for
one hour before trying again.
Radio Theft Protection
If the code card is lost, an Acura
dealer can access your code with
your radio's serial number. To
access the serial number, turn the
radio on. It must display ''COdE'',
then turn the radio off. Push the
preset 1, preset 6, and power buttons
at the same time, then quickly
release.
You will have to store your favorite
stations in the Preset buttons after
the system begins working. Your
original settings were lost when the
power was disconnected.
Comfort and Convenience Features
129
Advertisement
