Advertisement
Main Menu
Trip Meter
SELECT BUTTON
RESET BUTTON
This meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it.
Table of Contents
There are two trip meters: Trip A
and Trip B. Switch between these
displays by pressing the Select
button repeatedly. Each trip meter
works independently, so you can
keep track of two different distances.
When you turn the ignition switch
ON (II), what you last selected is
displayed.
To reset a trip meter, display it, and
then press and hold the Reset button
until the number resets to ''0.0''.
Both trip meters will reset if the
vehicle's battery goes dead or is
disconnected.
Temperature Gauge
This shows the temperature of the
engine's coolant. During normal
operation, the pointer should rise to
about the middle of the gauge. In
severe driving conditions, the pointer
may rise to the upper white mark. If
it reaches the red (Hot) mark, pull
safely to the side of the road. Turn to
page
for instructions and
240
precautions on checking the engine's
cooling system.
Instruments and Controls
Gauges
67
Advertisement
