D
5302 U
RYSTAR
SER MANUAL
Switching off the Drystar 5302
When you want to switch off the printer, it is recommended to follow the
procedure as described below, to make sure that any pending print jobs have
finished printing.
Make sure that pending jobs are correctly finished. If necessary, follow the
1
procedure to stop printing.
Press the Power/Reset button to switch off the Drystar 5302.
2
If the printer is ready, it shuts down immediately:
•
Power off initiated
Please wait
If the printer is busy printing images, it will first print all images in the memory before
•
shutting down:
Power off after
finishing images in
memory
Please wait
If there is an error/warning/incident during power off and there are still unprinted
•
images in the memory, the following message is displayed:
Are you sure to
power off the
printer? (images in
queue will be lost)
Press the Confirm button (YES) to proceed with the power-off, or the Escape button
(NO) to quit.
Powering off the printer with unprinted images in memory may result in
image loss!
32
Introducing the Drystar 5302
2831A EN 20041201