Fax Terminal's Telephone Number - Function 81; Transfer Station Number - Function - Ricoh FAX7000L Field Service Manual

1-7-2. Fax Terminal's Telephone Number - Function 81

If this number is not programmed, Transfer Request is impossible.
1. Make sure that the machine is in standby mode.
2. Press Function, then enter 80, then enter 2222.
3. Enter 81, then press Yes.
4.
Enter the fax terminal's telephone number. Place a pause after the area code, using the Pause key.
To correct a mistake, press Clear (erases the last digit or the cursor digit), or No (erases the entire
number).
5. Press Yes to store the displayed number, then press Function to return the machine to standby mode.

1-7-3. Transfer Station Number - Function 81

If this machine will be used as the first stage in a two-step transfer operation, the number of the terminal
acting as the second stage must be stored here. This function is only used in Group 4 communications.
1.
Make sure that the machine is in standby mode.
2. Press Function, then enter 80, then enter 2222.
3. Enter 81, then press Yes twice.
4. Enter the transfer station number.
To correct a mistake, press Clear (erases the last digit or the cursor digit), or No (erases the entire
number).
Press Yes to store the displayed number, then press Function to return the machine to standby mode.
5.
1-28