Table of Contents
Advertisement
Copying files from USB flash drives
and SD cards to blank CDs with or
without conversion
You can copy files stored on USB flash drives and SD cards to
blank CDs with or without conversion.
When copying MP3 or WAV files from a USB flash drive or an SD
card to a blank CD, you can set whether they are recorded in the
same file format on a data CD or recorded in audio CD format.
If audio CD is selected, the MP3 or WAV files on the USB flash
drive or SD card can be converted to audio CD format and re-
corded to the blank CD.
If you use an unfinalized CD-R/CD-RW disc that already has
tracks on it, the disc format is already set as audio CD or data CD,
and that format must be used.
CAUTION
This unit cannot record WAV files to CD-R/CD-RW discs, but
WAV files can be copied from USB/SD/CF media to CD-R/CD-
RW discs. This unit can play back WAV files copied to CD-R/
CD-RW discs.
Creating audio CDs
This explains the procedures for converting MP3 and WAV files
on USB flash drives and SD cards and copying them to CD-R/CD-
RW discs.
In the following procedures, we assume that CD is selected as
the current medium and that the USB flash drive or SD card
that contains the files to be copied and the CD-R/CD-RW disc to
which they are to be copied are loaded in the unit.
NOTE
Press the MENU button or select the PREVIOUS STEP item in
the pull-up menu to return to the previous step.
1.
Select the BURN TO CD item on the CD page. (See "Menu
operation procedures" on page 22.)
2.
Press the MULTI JOG dial to open a pop-up with file copy
source media options.
3.
Turn the MULTI JOG dial to select the medium with the files
to be copied.
4.
Press the MULTI JOG dial to open a pop-up with format op-
tions for writing the CD-R/CD-RW disc.
NOTE
An error message will appear if the selected medium is not
loaded.
10 – CD functions (SS-CDR250N only)
5.
Turn the MULTI JOG dial to select CD-DA.
NOTE
If the CD-R/CD-RW disc already contains audio format files,
writing format options will not be shown, and CD-DA will be
selected automatically.
6.
Press the MULTI JOG dial to open the SELECT BURN SOURCE
screen for the selected medium.
7.
Select the desired audio file, and press the MULTI JOG dial
to open the pop-up file menu.
8.
Select the SELECT/UNSELECT item in the file menu, and
press the MULTI JOG dial.
A check (4) is added to selected files.
Multiple files can be selected.
You cannot select a folder.
To select multiple files, repeat this procedure: select a de-
sired file, then select the SELECT/UNSELECT item from the
file menu and press the MULTI JOG dial.
To cancel selection of the selected file, select the SELECT/
UNSELECT item from the file menu and press the MULTI JOG
dial.
NOTE
i If the total size of the files to be copied exceeds the remaining
capacity of the selected medium or if the number of tracks
exceed system limits, a corresponding "No Free Space",
"Track limit reached." or "Folder limit reached." pop-
up message will appear.
i If this occurs, press the MENU [JOG] button to close the pop-
up message, and reduce the total copy source size or number
before selecting the NEXT STEP item.
i If a copy source file that is less than four seconds long is se-
lected, a "Cannot select as CD-DA track. This track is
under 4sec." pop-up message will appear.
9.
After selecting all the files to copy to the CD-R/CD-RW disc,
press the MULTI JOG dial to open the pop-up file menu.
TASCAM SS-CDR250N / SS-R250N
75
Advertisement
Table of Contents
