Table of Contents
Advertisement
Return to Table of Contents
Chronograph measurement
Chronograph standard or accumulated elapsed
time measurement.
1) Press button (M) to set the mode hand <CHR>
and get the chronograph display. At this
time, the second hand and the function hand
will return to the "O" position.
The hour, minute, and 24-hour hands
show the present time.
2) Each time button (A) is pressed, it
repeatedly starts or stop the chronograph,
along with a confirmation sound.
How to read each chronograph hand if the
measured time when the chronograph is stopped
is over 1 minute.
a. Read the number of minutes with the function
hand.
b. Read the number of seconds with the
second hand.
c. While pressing button (B) continuously, the
function hand switches to 1/20 (0.05) second
hand measurement, so read the value at that
time.
When button (B) is released, the function
hand resumes showing chronograph minutes.
3) While the chronograph is stopped state,
pressing button & reset the function hand and
the second hand to the "O" position.
Chronograph split measurement
Pressing button (C) during chronograph
measurement causes the chronograph split time
to appear on display with a beep for
confirmation.
Press button (C) again, the next chronograph
split time is displayed, along with a
confirmation sound. The split time display
is automatically cancelled after about 10
second, and the chronograph return to the
measurement state.
During either chronograph split time display
or measurement, pressing button (A) causes
the chronograph stop to appear on display.
In the chronograph stop state, pressing
button (C) causes the chronograph reset.
During split time measurement or while
split time display, each time you press
button (C) the next split time is
displayed.
Return to Table of Contents
Hide quick links:
Advertisement
Table of Contents
