Table of Contents
Advertisement
5) TIME SETTING AND RECHARGE WARNINGS
When shown the insufficient charge warning display
When shown the stop warning display
When shown the hands setting warning display
Return to Table of Contents
If the watch is put in the undercharged
state
switches to the time display when in
other display modes, then the second
hand
modes
indicating
such
a
sufficient light for the warning state
to
be
return to 1 second movement)
It takes about 30 minutes from starting
to expose the watch to light until this
warning
charging time varies depending on the
light (light source) that radiates over
the watch.
If the watch is left intact in the
undercharged state, about 5 days later
the second hand move to the ^STOP
position, indicating that the watch has
stopped due to insufficient recharge.
* All function are stopped in this state.
In such a case, expose the watch to
sufficient light for the warning state to
be cancelled.
After carrying out sufficient
charging, it is necessary to reset
the alarm time.
If you expose a watch which has stopped
once to light and recharge it, the second
hand will move to the ^SET position to let
you know that the time is incorrect.
In such a case, readjust the hour, minute
and 24- hour hands to keep correct time.
Without adjusting the time hands after the
watch is fully recharged, you cannot use
such function as alarm, chronograph, etc.
properly.
Be careful because if the watch is not
sufficiently
Setting
light is blocked from it, the second hand
will change to the ^STOP position and the
watch will stop running.
Return to Table of Contents
during
any
display
to
the
^CHARGE
insufficiently
case,
expose
cancelled.
(The
state
is
cancelled.
charged
Warning
Display
mode,
it
position,
charged.
In
the
watch
to
second
hand
The
during
the
Hands
State,
and
if
Hide quick links:
Advertisement
Table of Contents
