Table of Contents
Advertisement
Setting Instructions for Movement Caliber 0855
Contents
(click on a topic)
4) Special Functions of the Solar Powered Watch
6) Notes on Recharging
7) Time Required for Recharging
8) Using Your Watch
a. Changing the mode
b. Setting the Time
c. Using the Alarm
d. Using the Chronograph
e. Insufficient Charge and Time Setting Warnings
f. Checking and Adjusting the '0' Position for the Hands
9) Care of Your Timepiece
Advertisement
Table of Contents
Related Manuals for Citizen Eco-Drive 0855
Summary of Contents for Citizen Eco-Drive 0855
- Page 1 Setting Instructions for Movement Caliber 0855 Contents (click on a topic) 1) Outline 2) Specifications 3) Before Using 4) Special Functions of the Solar Powered Watch 5) Notes on Use 6) Notes on Recharging 7) Time Required for Recharging 8) Using Your Watch a.
-
Page 2: Specifications
Return to Table of Contents 1. Outline This is a multi-hand, multi-function analog solar powered watch with an alarm and chronograph functions. A solar power function as its base, which provides the power source for the watch hands movement and alarm sound by converting solar energy into electrical power with the solar cell, fitted on its face. -
Page 3: Before Using
Return to Table of Contents 3. BEFORE USING When the watch does not operate according to the handling instruction, it is insufficiently charged. Charge the secondary battery of the watch for more than 6 hours, approximately 20 cm away from the fluorescent lamp or incandescent lamp as light sources. -
Page 4: Notes On Use
Return to Table of Contents Insufficient Recharging Warning Function (Refer to section "Insufficient Charge and Time Setting Warnings") If the watch is put in the undercharged state during any display mode, it switches to the time display when in other display modes, then the second hand moves to the A CHARGE position, indicating the shortage of electricity. - Page 5 Return to Table of Contents 6. NOTES ON RECHARGE /!\ Caution * The watch will be damaged during recharging if it gets too hot (Over 60'C/140'F). Avoid recharging at high temperatures (Over 60 C/140 (eg)Charging the watch near a light source that easily become hot, such as an incandescent lamp or a halogen lamp.
- Page 6 Return to Table of Contents 8. HOW TO USE THIS WATCH 1) CHANGING THE MODE Other than the time display, this watch has alarm and chronograph main display functions- Each press of the (M) button changes Time <TME> -> Alarm <ALM> -> Chronograph <CHR> -> "O" position confirmation <(O)>. Confirm the change with the mode hand.
- Page 7 Return to Table of Contents 2) TIME SETTING Check that the mode hand is indicating <TME> and the watch is in time mode. 1) Pull the button (M) out, so that the second hand stops at the "O" position. Time setting synchronize the minute hand - >...
- Page 8 Return to Table of Contents Depress button (B) or (C) continuously, the hands move rapidly. After setting the alarm time, push the (M) button. The hour, minute and 24- hour hands move rapidly automatically to the present time. If those hands do not stop moving, push the (M) button again.
- Page 9 Return to Table of Contents Chronograph measurement Chronograph standard or accumulated elapsed time measurement. 1) Press button (M) to set the mode hand <CHR> and get the chronograph display. At this time, the second hand and the function hand will return to the "O" position. The hour, minute, and 24-hour hands show the present time.
- Page 10 Return to Table of Contents 5) TIME SETTING AND RECHARGE WARNINGS When shown the insufficient charge warning display If the watch is put in the undercharged state during display mode, switches to the time display when in other display modes, then the second hand modes ^CHARGE...
- Page 11 Return to Table of Contents 6) CHECKING AND ADJUSTING EACH HAND'S "O" POSITION The watch's display may be incorrect due to the effect of static electricity, strong shock, etc. In such a case, check and adjust the "O" position of each of the following hands. “0”...
- Page 12 Return to Table of Contents PRECAUTIONS ABOUT CARE AND HANDLING OF WATCHES TEMPERATURE CARE that water resistant quality remains at factory specifications. Avoid temperature extremes. Exposing your watch to high temperatures, such as placing it on the dashboard of a vehicle CARE FOR METAL BRACELETS or use in a hot tub, may cause the watch to malfunction, To extend the life and maintain the good appearance of the...