Using The Chronograph; Switching The Alarm On And Off; Alarm Sound Monitor - Citizen Eco-Drive 0855 Setting Instructions Manual

Depress button (B) or (C) continuously, the hands move rapidly.
After setting the alarm time, push the (M) button. The hour, minute and 24-
hour hands move rapidly automatically to the present time. If those hands do
not stop moving, push the (M) button again.

Switching the alarm ON and OFF

Each time button (A) is pressed in the alarm mode, the alarm switches ON and OFF

Alarm sound monitor

On the alarm mode (button (M) in the normal position), press button (A) and the
alarm will sound for 5 seconds.
Note
* There may be some variation in the volume of the alarm sound, depending on
how much the Eco Drive Rechargeable battery is charged.
* The alarm sound volume gets rather lower in the display other than the time
display (alarm, chronograph, "O" position confirmation, and each display's
adjustment state).
Once the alarm time has been set, use the watch normally in time display mode.

4) USING THE CHRONOGRAPH

Chronograph measurement is taken in 1/20 (0.05) seconds and can continue
for 60 minutes max. Over 60 minutes, the watch enters the chronograph-
reset state.
Chronograph reset
Read the chronograph hands
For measurement less than 1 minute
Second hand -> Chronograph second hand Function hand -> Chronograph 1/20
second hand
For measurement over 1, minute:
Second hand -> Chronograph second hand Function hand -> Chronograph
minute hand
Return to Table of Contents
Chronograph measurement
Return to Table of Contents