How To Use This Watch; Changing The Mode - Citizen Eco-Drive 0855 Setting Instructions Manual

8. HOW TO USE THIS WATCH

1) CHANGING THE MODE

Other than the time display, this watch has alarm and chronograph main
display functions- Each press of the (M) button changes Time <TME> ->
Alarm <ALM> -> Chronograph <CHR> -> "O" position confirmation <(O)>.
Confirm the change with the mode hand.
After that returns to the time mode <TME> display.
Display present time in hours,
minutes, seconds and 24-hours.
Use the 24-hour hand to confirm
am/pm
Not used usually. This
display function should be
used to adjust the display
correctly, in case a wrong
display of
time results from static
electricity, shock etc
Return to Table of Contents
Display alarm set time. The alarm
setting is in
1 minute. Confirm of am/pm with
the 24-hour hand If the alarm is
ON, it will ring at the set time
for 15 seconds once every day.
Measures up to a maximum
60 minutes in 1/20
seconds, and display split
times.
A confirmation sounds when
you start/stop or measure
a split time
Return to Table of Contents