Checking And Adjusting Each Hand's "O" Position - Citizen Eco-Drive 0855 Setting Instructions Manual

6) CHECKING AND ADJUSTING EACH HAND'S "O" POSITION

The watch's display may be incorrect due to the effect of static
electricity, strong shock, etc. In such a case, check and adjust the "O"
position of each of the following hands.
Replacement of the Eco Drive Rechargeable battery
Since the secondary battery used in this watch is rechargeable, it does
not need to be replaced periodically. Please note, this is not a user
replaceable item.
Return to Table of Contents
"0" Position Checking
Press button (M) to adjust the mode hand to
zero (0) position. Then the watch is put in
the '0' position check mode. At this time,
check that the second hand and the function
hand return to the "O" position or(1 2
o'clock position).
When the second hand or the function hand
is not in the "O" position (12 o'clock
position), "O" position adjustment is
necessary.
"O" position adjustment
1) In "O" position check mode, pull out
button (M)
2) Adjust each hand to the "O" position.
Second hand "O" position adjustment
.......... adjust by pressing button (A)
Function hand "O" position adjustment
.......... adjust by pressing button (B)
Press button (A) or (B) continuously, the
hands will move rapidly.
3) Push button (M) to its normal position
after "O" position adjustment completely.
After finishing "O" position adjustment,
reset the time and the alarm set time.
Return to Table of Contents