Omron NB3Q-TW00B Startup Manual Manual page 76

4 Screen Creation
The whole screen is shown below. The creating methods for fixed text and Bit Button components for
[Open], [Stop] and [Close] garage door operations are the same as that of [1 Wait].
a Screen b Fixed Texts c Number Display components d Function Keys e Bit Button components
Number Display Components
The current values of TIM0 and CNT0 on the ladder program.
The property settings for the Number Display are:
Corresponding Name
Read Address
Storage Format
Graphics
Function Key Components
These are used for switching to [1 Wait] and [7 Check 2] screens.
The property settings for the Function Key components are:
Screen Name
Function Key
Label
Graphics
4-24
a
b
d
c
TIM0
T0
Unsigned int
Use the vector graphic:
BlueFrame.vg (A vector graphic consists of a Number Display component
and a blue border.)
Previous Screen
Change Screen[7 Check 2]
Transport font:
0: Previous Screen
1: Previous Screen
Use the vector graphic: CTRL_BAR001.vg
C0
Unsigned int
Wait Screen
Change Screen[1 Wait]
Transport font:
0: Wait Screen
1: Wait Screen
NB-series Programmable Terminals Startup Guide Manual(V109)
e
CNT0