Omron NB3Q-TW00B Startup Manual Manual page 71

The whole screen is shown below.
a
b
The configuration of the Bit Lamp is shown below. The creating method of the Bit Button components is
the same as that of [1 Wait].
Bit Lamp
The Bit Lamp and a macro program are used in this project to flash the prompt information.
1
Select [Bit Lamp] from [Parts], drag it to the edit window after selecting it with a single-click.
The property settings for the Bit Lamp are:
Read Address
Type
Cycle
Label
NB-series Programmable Terminals Startup Guide Manual(V109)
a Screen b Bit Lamp c Bit Button components
LW.B 10.0
Value 1 Blinking state 1, value 0 Showing state 0
5∗100 ms
Transport font:
0: blank
1: Shutter Stopped
4 Screen Creation
4-19
4