Brother HL-1850 Service Manual page 258

Title & Subtitle
FONT SELECT
300DPI PRIORITY
FX/XL SCALE FONT
FX/XL SCALE ITA.
exit FONT
PAPER&TRAY SIZE
PARALLEL MENU
PARALLEL TIMING
STB/ACK DELAY
exit PARALLEL
REPRINT ON/OFF
Item to be Set
3B PRIO=LOW*
3B PRIO=HIGH
SCAL.F=NORMAL*
SCAL.F=ALL SIZE
ITA=OBLIQUE*
ITA=ITALIC SEL
DEF PAPER=LT*
DEF PAPER=A4
CDCC PSW=H*
CDDC PSW=L
CDCC BSSL=L*
CDCC BSSL=H
REPRINT=ON*
REPRINT=OFF
7-5
HL-1850/1870N SERVICE MANUAL
Description
The priority of selection for
300dpi bitmap fonts are
standard (=low).
The priority of selection for
300dpi bitmap fonts are higher
than scalable font. The
compatibility of font selection
manner with HP LaserJet 4 is
not maintained if you choose 3B
PRIO=HIGH.
Only similar size fonts are
selectable as scalable is
selected.
All fonts are selectable.
Makes upright font oblique to
have italic as scalable font is
selected.
Uses the italic font to have italic
as scalable font is selected.
Printers to be shipped to USA
and Canada have the Letter
size setting by default.
Printers to be shipped to the
other area than USA and
Canada have the A4 size setting
by default.
BUSY signal gets high when
STROBE signal goes up. This
is chosen by default.
BUSY signal gets high when
STROBE signal goes down
(low).
ACK signal is sent out before
BUSY signal goes down. This
is chosen by default.
ACK signal is sent out when
BUSY signal goes down.
Follows the user menu’s setting
which selects either enabling or
disabling reprint function.
Enables reprint function.