Brother HL-1850 Service Manual page 145

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
NOTE:
When re-assembling the paper eject actuator and the eject actuator spring to the FU frame
lower, ensure the paper eject actuator is seated correctly in the locating channel referring to
the figure below;
(22) Release the thermistor harness from the hooks on the FU frame upper and then remove
the one cup B M3x12 Taptite screw and remove the thermistor ASSY.
Paper eject actuator
(hooks)
FU frame lower
Fig. 4-62
FU frame upper
Taptite, cup B M3x12
(hook)
Fig. 4-63
4-38
Eject actuator spring
Thermistor ASSY