Brother HL-1850 Service Manual page 125

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(4) Remove the roller holder using a pair of tweezers from the paper guide upper ASSY while
pushing the pressure roller slightly down to assist the roller holder being released.
(5) Turn the DX feed ASSY upside down and remove the bind B M3x5 Taptite screw from the
DX feed ASSY.
(6) Turn the DX feed ASSY the correct way up and remove the side regist roller holder and
the pressure rollers using a pair of tweezers by releasing the boss from the left guide plate
ASSY. Remove the two pressure rollers from the side regist roller holder.
Side regist roller holder
Left guide plate ASSY
(boss)
Paper guide upper ASSY
Pressure rollers
(boss)
DX feed ASSY
Roller holder
Fig. 4-28
Taptite,bind B M3x5
Fig. 4-29
4-18
Pressure roller
DX feed ASSY (Back side)