Brother HL-1850 Service Manual page 121

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(6) Turn the top cover upside down and remove the three cup B M3x8 Taptite screws from the
top cover.
(7) Turn the top cover the correct way up to remove the panel cover ASSY from the top cover.
Panel cover ASSY
(8) Disconnect the connector and the harness connected with the panel PCB ASSY.
(9) Remove the three cup B M3x10 Taptite screws to remove the panel PCB ASSY from the
panel cover ASSY.
Top cover (Back side)
Taptite,cup B M3x10
LCD holder
Taptite,cup B M3x8
Fig. 4-20
Panel cover ASSY
Fig. 4-21
4-14
Panel PCB ASSY
Taptite,cup B M3x10