Brother HL-1850 Service Manual page 137

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(5) Remove the three bind B tite 3x10 screws to remove the FU front paper guide from the
fixing unit .
(6) Remove the two cup B M3x20 Taptite screws from the top of the fixing unit frame.
(7) Release the thermistor harness from the hooks.
Taptite, cup B M3x20
Fixing unit
FU front paper guide
Fig. 4-50
Taptite, cup B M3x20
Thermistor harness
Fig. 4-51
Pin
Screw, bind B tite 3x10
Fixing unit
(hooks)
4-30