Mic Sense; Time-Out Timer - Kenwood TK-3230DX Instruction Manual

MIC SENSE

You can adjust the sensitivity level of the transceiver
microphone.
To select the mic sense:
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
select "

TIME-OUT TIMER

The Time-out Timer prevents you from using a channel for a
extended durations. This function is useful, for example, when
you accidentally keep the PTT switch pressed. Additionally, by
limiting the amount of time you can continuously transmit, this
feature helps you save on battery power consumption.
If you continuously transmit for 3 minutes (default value), the
transceiver will stop transmitting and a tone will sound. To
stop the tone, release the PTT switch. You can press the PTT
switch again to resume transmitting.
To change the default value of 3 minutes:
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
to select "
minutes).
This transceiver is also equipped with a pre-alert tone which
sounds 10 seconds before the Time-out Timer expires. This will
allow you time to fi nish your message before the transceiver
automatically stops transmitting.
or key to select "
" (normal) or "
or key to select "
" (3 minutes) or "
".
or to
" (high).
".
or
" (10
41