Unpacking And Checking Equipment; Supplied Accessories; Preparation; Installing/ Removing The Battery Pack - Kenwood TK-3230DX Instruction Manual

UNPACKING AND CHECKING EQUIPMENT

Carefully unpack the transceiver. If any of the items listed
below are missing or damaged, fi le a claim with the carrier
immediately.

SUPPLIED ACCESSORIES

• Battery charger/ AC adapter (KSC-37S) ................................ 1
• Li-ion Battery pack (KNB-46L) ................................................ 1
• Belt clip (KBH-14) ................................................................... 1
• Screw (M3 x 8 mm) ................................................................ 2
• Warranty card ......................................................................... 1
• Instruction manual .................................................................. 1

INSTALLING/ REMOVING THE BATTERY PACK

CAUTION
◆ Do not short the battery terminals or dispose of the battery by
fi re.
◆ Never attempt to remove the casing from the battery pack.
12

PREPARATION

1 Match the guides of the
battery pack with the
corresponding grooves on the
upper rear of the transceiver,
then fi rmly press the battery
pack to lock it in place.
2 To remove the battery pack, lift
the safety catch on the base
of the transceiver, then press
the release latch underneath
the safety catch.