Basic Operation - Kenwood TK-3230DX Instruction Manual

Switch the Power ON
Switch the transceiver power ON by turning the
Power switch/ Volume control clockwise.
• A confi rmation tone sounds, the LCD lights up
momentarily, then the current channel number is
displayed.
To switch the transceiver power OFF, turn
the Power switch/ Volume control fully
counterclockwise, until a click sounds.
Adjust the Volume
Set your desired volume level by rotating the
Power switch/ Volume control.
• Clockwise increases the volume and counterclockwise
decreases the volume.
Note:
◆ To adjust the volume using background noise as a
reference, use the Monitor function {page 22}.
Select a Channel
Select a channel by pressing the
• A confi rmation tone sounds each time you press the
or key.
• When you receive a call on your selected channel, you
will hear audio from the speaker and the LED will light
green.
• To use a signaling code, refer to "QUIET TALK/
DIGITAL QUIET TALK" {page 18}.

BASIC OPERATION

or key.
17