Selcall (Selective Calling) - Kenwood TK-3230DX Instruction Manual

SELCALL (SELECTIVE CALLING)

A Selcall is a voice call to a particular station or group of
stations. Each transceiver is set up with an individual ID
number for use with selcalls.
There are several types of Selcalls available: Individual, Group,
and Broadcast.
• Individual Calls are calls made to individual parties.
• Group Calls are calls made to all parties within a group.
• Broadcast Calls are calls made to all parties in all groups.
The default status of the transceiver does not allow you to
make a Selcall. Use the following procedures to set up your
transceiver to allow Selcalls:
Step 1: Activate the FleetSync Optional Signaling
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
(FleetSync).
• After setting the Optional Signaling to FleetSync, you will no
longer be able to receive calls except selcalls.
Step 2: Set up the CAL key
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
(selcall).
Step 3: Set up your own ID (ID List Setting Mode for Selcall)
1 With the transceiver power OFF, press
and hold the CAL key while turning the
transceiver power ON (for 1 second).
• A beep will sound and the transceiver will enter
ID List Setting Mode.
2 Press the
number.
34
or key to select "
or key to select "
or key to select a list ID
" (Optional Signaling).
or to select "
".
or to select "
"
"