Actions When Hdd Error; E602 In Detail - Canon iR C6800 Series Service Manual

Chapter 4

4.4 Actions when HDD Error

4.4.1 E602 in Detail

If the machine suffers a fault associated with E602 xxyy, it calls for different remedial actions as identified by the
sub code.
if E602 xxyy is indicated, be sure always to turn off and then on the machine (so that it will run auto
recovery sequence).
xx Partition
00 HDD as a
whole
4-12
yy Description
01 The machine cannot recognize the HDD. The machine cannot find BOOTDEV at time
of startup.
Remedy: Turn off the main power, and check the connection of the 2 types of
cables (power, IDE) connecting to the HDD; then, turn on the power.
When doing so, check to see if the HDD rotates and if the power is supplied.
NG
F
02 The machine cannot find the system software for the CPU of the main controller
(main) in BOOT DEV.
Remedy:
NG
E
03 The machine detects a read error sector while it is reading data from BOOTDEV.
Remedy:
NG
H
06 The machine cannot find the system software for the CPU of the main controller (sub)
in BOOTDEV.
Remedy:
NG
E
07 The machine cannot find an appropriate ICCProfile in BOOTDEV/PDLDEV.
Remedy:
NG
E
T-4-11
D
F
NG
E F
F
F
0002-3236