Chapter 8
8.3.1.2 Delay Jam (source of paper other than cassette/deck)
The machine identifies a delay jam as follows when the source of paper is not the cassette:
The machine monitors the length of time between when paper leaves the sensor N 1 and when it reaches the sensor
N (i.e., the sensor used for detection), and it will identify a delay jam if the sensor N does not go on within a specific
period of time after the sensor N 1 has gone on.
Start key ON
or PRINT setting reached
Sensor N-1
Jam check
Sensor N
F-8-18
Sensor
Vertical path confluence sensor (PS32)
Vertical path 0 sensor (PS31)
Vertical path 1 sensor (PS60)
Vertical path 2 sensor (PS61)
Vertical path 3 sensor (PS62)
Vertical path 4 sensor (PS63)
Transparency sensor (front; PS3)
Transparency sensor (rear; PS29)
Registration sensor (PS9)
Post transfer sensor (PS10)
Inside delivery sensor (PS12)
Reversal sensor (PS14)
Outside delivery sensor (PS13)
Reversal vertical path sensor (PS15)
Duplexing left sensor (PS17)
Duplexing confluence sensor (PS18)
8-18
INTR
/
PRINT
[1]
Normal
[1]
Error
[1]:specific period of time (feed)
T-8-9
Remarks
if not transparency
if not transparency
if transparency
0003-2805