Turning On The Main Power Switch; Setting Up The Paper Cassette - Canon iR C6800 Series Service Manual

Chapter 2
2.2.13 Turning On the
Main Power Switch
1. Be sure to remove all packing material from the
cassette before turning on the main power.
2. In the case of the 230 V model, take out the power
cord from the shipping box; then, connect its one end
to the machine and the other end to the power outlet.
3. The rotary starts to rotate when the main power is
tuned on. Do not use the door switch actuator.
1) In the case of the 100V model, connect the
grounding wire to ground the machine.
2) Connect the machine's power plug to the power
outlet, and turn on the main power [1].
3) Execute the following in service mode to disable
initial
COPIER>FUNCTION>INSTALL>AINR OFF;
then, set it to '1'.
Be sure to execute the foregoing service mode
item after turning on the power to disable initial
rotation. If the power is turned off and then on, the
machine will start initial rotation, possibly causing an
error in its image stabilization mechanism.
[1]
F-2-97
2-26
2.2.14 Setting Up the Paper
0003-1015
1) Press the cassette release button, and slide out the
cassette to the front.
2) Check with the user to find out the type of paper to
use; then, check to see if the size configuration switch
[1] of the cassette is set to the desired paper type. If
not, set the cassette to suit the type.
3) Turn the paper size dial [2] to suit the desired paper
size.
rotation:
F-2-98
4) Pick the lever [1] of the side guide plate, and move
the side guide plate to the desired size marking.
5) Remove the lever [2] of the rear end guide plate.
Fit the rear end guide plate to match the desired size
marking on the bottom plate of the cassette.
F-2-99
6) Attach the correct size label [1] to the front of the
cassette.
Cassette
[2]
[1]
[1]
0002-6732
[2]