Ricoh LW5100en Operating Instructions Manual page 46

1. Getting Started
5. [Program] key (copier, Document Server, and scanner mode)
• Press to register frequently used settings, or to recall registered settings (except Document Server mode).
See "Registering Frequently Used Functions", Copy/Document Server Reference.
See "Registering Frequently Used Setting" Scanner Reference.
• Press to program defaults for the initial display when modes are cleared or reset, or immediately after
the operation switch is turned on. See "Registering the Initial Display's Default Functions", Copy/
Document Server Reference.
See "Registering the Default Values of the Scanner's Initial Display", Scanner Reference.
6. [Interrupt] key
Press to make interrupt copies. See "Interrupt Copy", Copy/Document Server Reference.
7. [Energy Saver] key
Press to switch to and from Energy Saver mode. See "Saving Energy".
8. Main power indicator
The main power indicator goes on when you turn on the main power switch.
9. Operation switch
Press to turn the power on (the operation switch indicator goes on). To turn the power off, press again (the
operation switch indicator goes off). See "Turning On the Power".
10. [Login/Logout] key
Press this to log in or log out.
11. [Simplified Display] key
Press this to switch to the Simplified Display.
12. [Sample Copy] key
Press to make a single set of copies or prints to check print quality before making multiple sets. See "Sample
Copy", Copy/ Document Server Reference.
13. [Start] key
Press to start copying, printing, scanning, or sending.
14. [ ] key (Enter key)
Press to confirm values entered or items specified.
15. [Clear/Stop] key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job in progress, such as copying, scanning, or printing.
16. Number keys
Use to enter the numbers for copies and data for the selected function.
17. Alert indicator
Lights continuously if an error has occurred.
44