Displaying And Printing Help - Ricoh 5100WD Operating Instructions Manual

4. Printing GL/2 and TIFF Files
10. Click the file that matches the AutoCAD application you want to use.
AC2000: AutoCAD 2000/AutoCAD LT2000
AC2000i: AutoCAD 2000i/AutoCAD LT2000i
AC2002: AutoCAD 2002/AutoCAD LT2002
AC2004: AutoCAD 2004/AutoCAD LT2004/AutoCAD 2005/
AutoCAD LT2005/AutoCAD 2006/AutoCAD LT2006
AC2007: AutoCAD 2007/AutoCAD LT2007
AC2008: AutoCAD 2008/AutoCAD LT2008
Check the driver you selected matches the AutoCAD version you want to use. If they do not match,
an error screen appears. See the HDI driver's Readme if this occurs.
4
11. Select the driver you want to install, and then click [Open].
12. In "Manufacturers", select the manufacturer. Then, in "Models", select the printer driver.
Then click [Next >].
13. Click [Next >].
14. Select [Port], then select the port you want to use, and then click [Next >].
Select the network port you want to use in the [Port] option button. If a local port is selected, printing
may not be performed properly.
15. Confirm the plotter name you want to use is selected, and then click [Next >].
Installation is complete. If the installation is successful, the HDI driver is added to the [AutoDesk Plotter
Settings (Plotter window)] window, and it can be selected from [Printing Devices] during printing. For
details about screens and printing procedures, see the online Help. To display the online Help, click
[Help] on the printer driver screen.
16. Click [Finish].

Displaying and Printing Help

Displaying Help
This section explains installation using AutoCAD 2008.
1. On the [File] menu, click [Plot...].
The [Plot...] dialog box appears.
2. Check the HDI driver you want to use appears in the [Name:] list in the "Printer/plotter"
area, and then click [Properties...].
3. Click [Custom Properties] on the [Device and Document Settings] tab.
The [Custom Properties] button appears under the screen.
110