Ricoh 5100WD Operating Instructions Manual page 116

4. Printing GL/2 and TIFF Files
Command
UC
Commands for changing the plotting domain
The HP-GL/2 filter does not support the following commands for changing the plotting domain according
to the HP plotter and will ignore them if they are included:
Command
4
OW
Plotter control commands
The HP-GL/2 filter does not support the following commands for plotter control according to the HP plotter
and will ignore them if they are included:
Command
AP
FS
AS
VS
VA
VN
GP
SG
CV
AF
AH
EC
114
Plots symbols not defined in the character set.
Enables the left down and right down coordinates of the window to be
output.
Specifies the automatic pen function.
Specifies the pen pressure.
Specifies the pen acceleration.
Specifies the maximum speed when the pen is lowered.
Automatically adjusts the speed of the pen when it is lowered to the
speed at which the computer sends the coordinates.
Used when disabling the VA command.
Used when collecting pens of the same type and color into one group.
Selects the group specified by the GP command.
Controls the curve line generator.
Feeds paper only when something is being plotted on the current paper.
Feeds half of the paper only when something is being plotted on the
current paper.
Controls the paper cut function.
Description
Description
Description