Ricoh 5100WD Operating Instructions Manual page 76

3. Other Print Operations
• the file contains over 1,000 pages.
• the machine's sent or stored files total over 3,000 pages. (The total varies depending on the size
of the files.)
• If a Hold Print file has not been stored properly, check the error log on the control panel.
• Even after you turn off the machine, stored documents in the machine remain. However, the [Auto
Delete Temporary Print Jobs] or [Auto Delete Stored Print Jobs] settings are applied first.
• If the application has a collate option, make sure it is not selected before sending a print job. By
3
default, Hold Print jobs are automatically collated by the printer driver. If a collate option is selected
from the application's Print dialog box, more prints than intended may be produced.
• For details about the error log on the control panel, see "Checking the Error Log"
• For details about the [Auto Delete Temporary Print Jobs] and [Auto Delete Stored Print Jobs], see
"Printer Features", General Settings Guide.
• p.87 "Checking the Error Log"
Printing a Hold Print file
The following procedure describes how to print a Hold Print file with the RPCS printer driver. For details
about how to print a Hold Print file with the PostScript 3 printer driver, see Postscript 3 Supplement included
as a PDF file in the supplied CD-ROM.
• Applications with their own drivers, such as PageMaker, do not support this function.
• If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this function.
1. Configure Hold Print in the printer driver's properties.
For details about configuring the printer drivers, see the relevant Help files.
2. Click [Details...], and then enter a User ID in the [User ID:] box.
3. Start printing from the application's [Print] dialog box.
The Hold Print job is sent to the machine and stored.
4. On the machine's control panel, press the [Printer] key to display the printer screen.
74