Cover The Hairpins. See Figure - Lennox BCE3M*C SERIES Installation Instructions Manual

5. Reinstall the top cap. Rotate the blow-off prevention
brackets 180º and reinstall using the same screws.
Use the correct mounting holes; the brackets must

cover the hairpins. See figure 7.

6. Slide coil assembly, bottom drain pan and horizontal
drain pan as one unit back into the air handler. See
figure 8.
507621-01
Figure 7
Figure 8
7. Reinstall the brackets that hold the coil and horizontal
drain pan in place. See figure 9.
8. Reinstall the blower and coil access panels.
Issue 1720
Figure 9
Page 7 of 23