Installing Drivers And Software - Siemens SIMATIC Rack PC 840 V2 Operating Instructions Manual

Setting up the language selection for Windows XP Professional
The Multilanguage User Interface (MUI) allows you to set up the Windows XP Professional
menus and dialogs for additional languages.
To install the MUI, start
"MUI-german"
or "MUI Windows XP" in root folder of your Recovery CD to run MUISETUP.EXE. Follow the
instructions on the screen to install the required languages.
Default language of your Windows XP MUI installation is English and a US keyboard layout.
You can change the language in the Control Panel with the dialog
Start > Control Panel > Date & Time, Language, and Regional Options > Add other languages,
Languages tab, Language used in menus and dialogs field.
For the Date, Time, Language, and Regional Options, set the default as non-Unicode programs
under Advanced in addition to the language for menus and dialogs.
11.2.5

Installing drivers and software

Notice
Before you install new drivers or updates for MUI operating systems, the regional settings for
menus and dialogs and the default language must be reset to US English.
Install the drivers and software from the included "Documentation and Drivers". Procedure:
1. Place the CD in the CD ROM drive.
2. Run
3. Navigate to the driver list (language-, OS- and device-specific.)
4. Install the relevant driver according to the specifications in the driver list.
Notice
For new Windows 2000 / XP installations, the chipset driver must be installed before you
install any other drivers.
When you install Windows NT, you need to install the Windows NT Service Pack before you
install any other drivers. The Service Pack must be reinstalled after a driver installation.
SIMATIC Rack PC 840 V2
Operating Instructions, Edition 05/2006, A5E00248055-04
START
.
Maintenance and service
11.2 Reinstalling the software
11-25