Siemens SIMATIC Rack PC 840 V2 Operating Instructions Manual page 72

Maintenance and service
11.2 Reinstalling the software
4. Select
A:\>FDisk
5. In the select form, select support for large disks to set up the FAT16 partition.
Activate support (Y/N)...?
6. Create a primary DOS partition with 2045 MB for a FAT16 file system. When prompted
Do you want to use the maximum available space for the primary DOS partition and activate this
partition?
7. Format the primary DOS partition by booting from the Recovery CD, as described above
A:\>Format C:
8. The formatting of the NTFS partitions is performed by the setup program of Windows NT.
11-18
the Microsoft Windows 98 hard disk configuration program (A: is the CD drive).
[ N ] for no.
answer with [ Y ] for Yes.
in steps 1 to 3. The run "Format" to . At the prompt, enter:
Run Windows NT Setup.
Caution
All the data of the relevant partition will be lost during formatting.
Operating Instructions, Edition 05/2006, A5E00248055-04
SIMATIC Rack PC 840 V2