Default Bios Setup Entries - Siemens SIMATIC Rack PC 840 V2 Operating Instructions Manual

16.5.11

Default BIOS Setup entries

Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you have made your
entries.
BIOS setup default settings
System parameters
Main
System Time
System Date
Floppy disk A
Primary Master
Primary Slave
Secondary Master
Secondary slave
Memory Cache
Boot options
Quick Boot Mode
SETUP prompt
POST errors
Floppy check
Summary screen
Keyboard Features
Num Lock
Key Click
Keyboard auto–repeat rate
Keyboard auto–repeat delay
SIMATIC Rack PC 840 V2
Operating Instructions, Edition 05/2006, A5E00248055-04
Defaults
hh:mm:ss
MM/DD/YYYY
1.44 MB, 3½"
HDS722580-VLAT20 (PM)
None
CDROM
None
Write Back
Enabled
Enabled
Enabled
Disabled
Enabled
On
Disabled
30/sec
½ sec
Detailed descriptions
16.5 BIOS Setup
Custom entries
16-45