Table of Contents
Advertisement
7. Place the right rear chunk log (#7) on top
of the middle log (#2) and rear log (#1)
as shown in
Figure 27. Match the round
peg on the top of the rear log (#1) with
the round hole on the bottom of the right
rear chunk (#7) log and square peg on the
top of the middle log (#2) with the square
hole on the bottom of the right
log (#7).
Figure 27 - Installing Log # 7
8.
Place the front right mid log (#8) on top of
the front right log (#4) as shown
28. Match the round metal pin on the top
of the front right log (#4) with the round
hole on the bottom of the front right mid
log (#8).
Metal
Pin
Figure 28 - Installing Log # 8
126817-01D
INSTALLATION
Continued
9. Place the top right log (#9) on top of the
right rear chunk log (#7) and front right
mid log (#8) as shown in
Match the round peg on the top of the right
rear chunk log (#7) with the round hole on
the bottom of the top right log (#9) and
square peg on the top of the front right
rear chunk
mid log (#8) with the square hole on the
bottom of the top right log (#9).
7
Round
Peg
Square Peg
10. Place the right rear top log (#10) on top of
the right rear chunk log (#7) as shown in
in Figure
Figure 30, Page 20. Match the rectangu-
lar peg on the top of the right rear chunk
log (#7) with the rectangular hole on the
bottom of the right rear top log (#10).
11. Place the left top log (#11) on top of the
left back top log (#5) and left top forked
8
log (#6) as shown in Figure 31, Page 20.
Match the round peg on the top of the left
top forked log (#6) with the round hole on
the bottom of the top left log (#11) and
rectangular peg on the top of the left back
top log (#5) with the rectangular hole on
the bottom of the top left log (#11).
12. Final Assembly is shown in Figure 32,
Page 20.
SuperiorFireplaces.us.com
Round
Peg
Square
Peg
Figure 29 - Installing Log # 9
Figure 29.
9
19
Advertisement
Table of Contents
